2015 Exmark VTS740EKC60400

Call for Price




  • Patented Mechanical Control System: With its solid rods, there are no cables to stretch, and no annoying loss of ground speed.
  • Now with Propane: The Vantage S-Series is now available with propane technology and a 52” UltraCut Series 4 full-floating deck.
  • Adjustable Front Reference Bar: Ergonomically designed steering system includes an adjustable front reference bar that can control the top end speed of the machine.
  • Zero-Maintenance Spindles: Made from rugged, cast aluminum with sealed bearings, our spindles are designed to withstand the effects of moisture and impacts, with no annual greasing required.
  • Operator Platform: A rubber platform with self-compensating suspension provides a comfortable ride for any size rider. Patented, integrated thigh pads also pivot away, allowing easy access for maintenance. Folds up for reduced trailering space.
  • Hydro-Drive: Smoother operation and consistent control is made possible with our new 12 cc pump and 230 cc wheel motor.
  • Width / Cutting Deck: 60"
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Blades: 3 Blades at 20.50" Length
  • Cutting Heights: 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position.
  • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Curb Weight: 883
  • Height: 50 in. (127 cm)
  • Length: 74 in. (188 cm)
  • Width: 72.8 in. (184.9 cm)
  • Blade Spindles: No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft.
  • Casters: .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
  • Cup Holder: Optional
  • Drive Tires: 20 x 10.50-8 Kenda Tires
  • Electrical: 12-volt battery with 20-amp alternator.
  • Front Caster Tires: 11 x 4.0-5, smooth-tread, semipneumatic tires.
  • Mower Size: outfront
  • Parking Brake: Lever-actuated bar brake.
  • Steering Control: Twin levers with no-tools adjustable front reference bar to modify forward ground speed.
  • Tractor Frame: Welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
  • Fuel Type: Gas EFI
  • Air Filter: Heavy-duty canister air filtration system
  • Carb Compliant: No
  • Casters: .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
  • Deck Lift: Standard; mechanical lift-assist springs.
  • Drive Description: Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors.
  • Drive Wheel Release: Allows unit movement without engine running.
  • Engine Brand: Kohler®
  • Engine Displacement: 747
  • Engine Model: ECV740
  • Engine Series: Command™ EFI
  • Engine Speed: 3,600 rpm
  • Engine Type: Electronic Fuel Injected
  • Fuel Capacity: 8-gallon (30.3-L), single fuel tank with single fill location.
  • Fuel Indicator: Yes - Float Gauge
  • PTO Engagement: Warner 200 ft-lb clutch
  • Safety Package: Operator Presence Controls (OPC) with safety interlock system indicators
  • Speed: Infinitely variable speed selection 0-8.0 mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) reverse



Engine Manufacturer
Engine Type
747 cc


Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors
Wheel Size
Front: 11 x 4.0-5; Drive: 20 x 10.50-8
Fuel Capacity
8 gal. (30.3 L)


Deck Size
60 in.
Discharge Type
Side; Optional: Bag, Mulch


Related Products